CLP set for major changes: european commission launches a new major update of the chemicals classification and labelling regulation

18/11/2026

The European Commission is proposing an update to the CLP Regulation to align it with the latest GHS requirements.

The draft delegated regulation would incorporate the changes introduced by GHS Revisions 8, 9 and 10, as well as certain provisions from Revision 11 relating to aerosols and skin sensitising mixtures.

Physical Hazards

  1. New Classification of Explosives

The "Explosives" hazard class is being completely restructured. The current categories would be replaced by:

  • Category 1
  • Category 2A
  • Category 2B
  • Category 2C

Introduction of: « H209: Explosive » ; « H210: Very sensitive » ; « H211: May be sensitive » and removal of « H200 to H203 » and « H205 »

‍

  1. New Hazard Class: "Chemicals Under Pressure"

Creation of a new physical hazard class:

  • Press. Chem. 1 - H282: Extremely flammable chemical under pressure; may explode if heated
  • Press. Chem. 2 - H283: Flammable chemical under pressure; may explode if heated
  • Press. Chem. 3 - H284: Chemical under pressure; may explode if heated

‍

Applicable to:

  • Liquids or solids under a pressure ≥ 200 kPa ‍
  • Excluding aerosols ‍
  • Excluding gases under pressure

👉 This hazard class targets pressurised liquids or solids that are neither aerosols nor gases under pressure.

‍

  1. Revision of Aerosol Criteria

Clarifications include:

  • Alignment with UN provisions
  • Further guidance on heat of combustion
  • Clarification of the criteria for Categories 1, 2 and 3
  • Clear distinction between aerosols and chemicals under pressure

Modernisation of Toxicological Classification Methods

Introduction of Defined Approaches and NAMs (New Approach Methodologies)

These approaches combine: In vitro testing, QSAR models, existing data, validated decision algorithms.

They may be used for : Skin corrosion, skin irritation, serious eye damage, skin sensitisation.

  1. Skin Corrosion and Irritation

Tiered Approach

Data should be assessed according to the following hierarchy:

  • Human data
  • Standard animal data
  • In vitro/ex vivo data
  • pH and acid/alkaline reserve
  • Non-testing methods
  • Weight-of-evidence assessment

  1. Serious Eye Damage and Eye Irritation
  • Same tiered classification approach as for skin hazards
  • Formal recognition of Defined Approaches
  • Recognition of several OECD in vitro methods

  1. Skin Sensitisation

New accepted data sources (defined approaches ; In chemico methods ; in vitro methods ; QSAR models ; read-across approaches. The distinction between Category 1A and 1B is strengthened, with more precise sub-categorisation criteria, including : frequency of human cases / LLNA results / Guinea pig test results / …etc.

  1. Acute Inhalation Toxicity

A new Section 3.1.5 would be added regarding LC50 conversion.

Historical data generated using different exposure durations may be converted to the standard 4-hour exposure equivalent.

  1. Respiratory Sensitisation

Clarifications to the evaluation process include: Greater reliance on weight-of-evidence assessment ; improved use of human data ; further clarification of Category 1A and 1B classification criteria.

  1. Mutagenicity, Carcinogenicity and Reproductive Toxicity

No fundamental changes to the classification criteria. Updates to several recognised test methods ; adaptation of precautionary statements ; replacement of former P201/P202 statements by new statement P203.

P203 - Obtain, read and follow all safety instructions before use

‍

Combination of Hazard Statements

The proposal allows the combination of multiple H statements of equivalent severity in order to simplify labelling, provided that all hazards remain clearly communicated and that only repetitive wording is removed. A new example of such a combination has been added to Table 1.2: H315 + H319.

‍

Major Revision of Precautionary Statements

Precautionary Statements Removed : P201 - P202 - P310 - P311 - P312 - P313 - P314 - P315.

New Precautionary Statements

  • P203 Obtain, read and follow all safety instructions before use.
  • P316 Get emergency medical help immediately.
  • P317 Get medical help.
  • P318 IF exposed or concerned, get medical advice.
  • P319 Get medical help if you feel unwell.
  • P236 Keep only in original packaging; Division … in the transport configuration.
  • P265 Do not touch eyes.
  • P354 Rinse immediately with water for several minutes.

Timeline for the CLP update

  • Public consultation: until 16 October 2026.
  • Expected adoption: Q4 2026.
  • Entry into force: 20 days after publication in the Official Journal of the European Union.
  • General application: 24 months after entry into force.
  • End of transition period for products already on the market: 48 months after entry into force.

How Can EcoMundo Help You Comply with the New CLP Requirements?

The evolution of the CLP Regulation requires companies to reassess the classification of their substances and mixtures, adapt their labels, and update their Safety Data Sheets (SDS).

EcoMundo helps you anticipate and implement these new regulatory requirements, drawing on its technical and regulatory expertise in chemical compliance.

Our experts can help you:

  • Assess the impact of the new CLP provisions on your portfolio of substances and mixtures. ‍
  • Review your hazard classifications in accordance with the new criteria and recognized assessment methods. ‍
  • Update your SDS and labels, particularly hazard statements (H-statements) and precautionary statements (P-statements). ‍
  • Develop a compliance action plan tailored to your products and regulatory deadlines.

Stay ahead of CLP regulatory changes with EcoMundo!

Contact our experts for tailored support and ensure your chemical products remain compliant with regulatory requirements.